×
×

Fetching Flax: Plants for Fiber, Beauty and Seeds

1 / 7
Fields of flax in bloom reflect the sky above.
2 / 7
Seeds for growing flax are readily available from a number of merchants.
3 / 7
The stalks of fully dried flax bundles should be stiff before crushing the pods for the seeds.
4 / 7
Flax seeds are a wonderful source of omega-3 fatty acids, which have been linked to a variety of health benefits.
5 / 7
Perennial flax (Linum perenne) is often grown as a stunning ornamental.
6 / 7
Tow - the shorter, rougher fibers left over after heckling - is often spun into coarse yarn for cords or ropes.
7 / 7
Many weavers need to raise the humidity to weave dried flax fibers into linen. If your fiber is too dry, you might see uneven tension on your linen warp or scattered, loose threads. To solve this common issue, run a humidifier under your loom or lightly spray the warp. Take care not to spritz the metal components of your loom.

For three to four weeks a year, dozens of blue flowers make a field of flax look like a reflection of the sky. In that field, each flax flower’s life is transitory — a flower only lasts a day. Then, after flowers complete their bloom, seedpods swell to the size of a pea and turn from green to gold as the seeds ripen inside, and the plants dry out and die.

Common flax (Linum usitatissimum), Latin for “the most useful kind of flax,” is the flax species grown for fiber and seed production. Flax is almost always grown like a grain crop, in plots of many plants crowded close together. Each individual plant makes one or more slender, erect stems about 3 feet tall, scattered with narrow, pale-green leaves about 1 inch long. The stems branch near the top to bear blue or white round, 1⁄2-inch-wide flowers with five petals.

Different cultivars of flax have been selected for maximum yield and quality of either fiber or oil. Farmers specialize in one product or the other, choose cultivars accordingly, and take slightly different approaches to growing and harvesting their crops. However, it isn’t necessary to specialize on a backyard scale. You can harvest enough fiber to make a basket and enough seeds for a batch of bread or crackers from a flax patch about 4 square feet in size.

How to Grow Flax

Flax tolerates a range of soils and climates and can be grown in almost any part of the United States. Choose a site in full sun, with deep, fertile, well-drained soil, and prepare it as you would for growing vegetables or flowers. Flax grows best in cool weather, so sow it outdoors as soon as you can work the soil in spring, at the same time that you would sow peas, lettuce, or other cool-weather crops. This can be as early as January or as late as May, depending on where you live.

Rake the surface of the soil to prepare a smooth, fine-textured seedbed. Measure your planned flax plot to determine its area, and plan to sow about one tablespoon of flax seeds for every 10 square feet. Dust the small brown seeds with flour before sowing so that you can scatter them evenly across the surface of the plot. Then, use a rake to draw the seeds down into the soil, covering them 1⁄4 to 1⁄2 inch deep. Water gently if the soil starts to dry out before germination, which takes about 10 days.

Flax seedlings quickly develop a good root system and only need watering when the weather is unusually warm, dry, or windy. Pull out any weeds that appear before the seedlings have grown a few inches tall; after the seeds sprout, the flax plants will crowd out any weeds. Rabbits and rodents sometimes nibble flax, but it has few insect or disease problems. The only common, serious crisis in growing flax is that the tender stalks sometimes get knocked flat by hail or heavy rainstorms. If that happens, use the tines of a garden fork. They may straighten up again, or at least partially recover.

Harvest Flax Fibers for Seeds and Linen

The fibers in the stem of the flax plant form a thin layer between the woody core and the outer skin or epidermis that runs all the way from the roots to the tips. While fibers have already reached their full length when the flax begins to flower, about two months after planting, they’re still thin, delicate, and weak. From flowering until the death of the plant, the fibers become increasingly thicker and stronger, but also more stiff and brittle. Unfortunately, fiber quality peaks before the seeds have fully ripened. If you harvest the plants early enough to get top-quality fiber (usually about three months after planting), you’ll sacrifice most of the seed crop. If you wait until the seeds are ripe (about four months after planting), the fiber will have become coarse. This difference in the timing of harvest is a major reason why commercial flax farmers produce either fiber or seeds but not both. A hobby grower can compromise. The fiber from mature plants is too coarse for weaving fine fabrics, but it’s acceptable for making baskets or other simple craft projects.

To reap both seeds and fiber, harvest the flax about four months after planting. The leaves on the lower half or two-thirds of the stem will turn yellow and drop off. Most of the seedpods will have turned gold or tan; if you shake them, the seeds will rattle inside. Grasp the stems, a handful at a time, right at ground level and pull them up, roots and all. Shake the soil off the roots, lay a few handfuls of stems together side by side, and use rubber bands or string to secure them into a bundle.

Thresh Flax Seeds with Ingenuity and Might

Hang flax bundles in a warm place with good air circulation. Thresh out the seeds after a few weeks, when the stalks are stiff and dry. This takes some effort because you’ll need to crush open the pods. One method is to slide a pillowcase over the top end of a bundle, tie the case securely around the stems, then put it down on a paved driveway, sidewalk or other hard, flat surface. Beat the pods through the cloth with a block of wood, roll them with a rolling pin (push hard!), jump on the bag, or drive back and forth over it with a car.

After several minutes of such activity, open the bag to confirm that most of the pods have been crushed, shake the bundle vigorously to knock out all the seeds, then pour the seeds and chaff out of the pillowcase into a bowl and start again with the next bundle. After threshing all the bundles, sift the seeds through a colander or coarse strainer to remove bits of stems and broken pods. Step outdoors in the breeze and pour the seeds slowly from one container to another to winnow away any remaining chaff or dust.

Tools and Techniques to Process Flax Fibers

The process of bundling stems and extracting fibers for spinning requires a specialty tool set — including a ripple, a brake, a scutching board and knife, and a set of heckling combs — many hours of hard physical work, and a keen sense of timing and judgment that only comes from experience. The first step, called “retting,” involves soaking or wetting the stems for a period of days or weeks to promote bacterial action, which separates the different layers of stem tissues and loosens the fibers. After retting, the stems are dried again, then crushed between the wooden blades of the brake, which breaks the woody core into short bits that fall away from the mass of fibers. Finally, the bundles are combed through metal-tined heckling combs, called “hackles.” The result: a smooth bundle of long, straight fibers called “line flax” and a pile of fluffy, tangled, shorter fibers called “tow.” The line flax is used to make crisp, glossy fabrics, and the tow is used for everyday goods.

Where to Buy Flax Seeds for Planting

Baker Creek Heirloom Seeds
Fedco Seeds
Restoration Seeds
Sustainable Seed Company


Rita Buchanan is a weaver, spinner, and gardener in Winsted, Connecticut. She is the author of A Dyer’s Garden.

Published on Dec 19, 2016

Mother Earth Gardener

Expert advice on all aspects of growing.